Combining cutting-edge ultra-low particulate air (ULPA) filtration with 40 mm standard NATO threading, these P3 certified biofilters work with your existing NBC/CBRN gas mask to provide unparalleled, long-lasting protection from airborne viral and bacterial threats. These filters are vastly superior to common half-face masks in practically every scenario and offer 99.95% protection against COVID-19.
Features:
• Standard 40 mm NATO thread
• 20-year shelf life
• P3-certified protection (according to EN 143: 2000) filters 99.9999 +% of biological threats (not suitable for other CBRN threats)
• Uses some of the highest quality ULPA filter designs that operate on particles as small as 0.2 microns
• Prevents aerosol and airborne transmission of viral and bacterial threats
• Hydrophobic filter paper is ideal for decontamination showers
Maximum protection against pandemics and biological threats
Modern gas masks provide unparalleled protection against a wide variety of chemical, biological, radiological and nuclear threats. And now, with the new MIRA Safety ParticleMax P3 filter, the same high-quality mask can protect you from bacterial and viral threats - including widespread pandemics such as Ebola, coronavirus (including COVID-19) and H1N1.
This effectively transforms your gas mask into a respirator with the highest level of protection against air hazards. Unlike conventional surgical masks and half-face respirators, you will get complete sealing and protection of the entire face for everything, including the soft tissue around the eyes.
Designed using the latest ULPA filtration technology, the same type you'll find in "clean rooms" where semiconductors are made. These P3 filters meet some of the highest standards in almost all measurements.
They are manufactured using special filter media and Class 16 filter paper, resulting in a MERV 20 rating (highest achievable air filtration quality). ULPA filters at this stage are hand-made from a specially made fiberglass material and then go through a rigorous quality control process to ensure consistent quality for each filter.
They have also been subjected to extreme testing to ensure that they filter out all and almost all biological threats
from the environment. The filter is even hydrophobic, so you can wear the mask under a decontamination shower
without compromising your safety.
The end result?
A combination of a filter and a gas mask that is virtually bulletproof to almost any global biological threat.
NOTE: Due to their sophisticated and specialized design, these filters do NOT provide protection against common
CBRN threats and are primarily intended to protect against biological threats and airborne diseases.
Certificate and details:
• P3 R according to EN 143
• TH3 PR SL according to EN 12941
• TM3 PR SL according to EN 12942
• P3 filtration removes 99.9999 +% of biological threats in the air, both small and 0.2 microns
• Hydrophobic internal construction, suitable for chemical showers
• Less than 0.05% penetration at up to 95 l / min. air flow
• Demonstrated at aerosol concentrations up to 20 ± 5 mg / m3
Storage:
The filter should be stored in a dark, cool, dust-free environment that is regularly ventilated and without sudden
temperature changes. Temperatures can range between -5 ° C and 30 ° C with a relative humidity of up to 80%.
The filter must not be exposed to shocks, dangerous gases or vapors.
Do not attempt to regenerate filters. Never clean the filters with compressed air or compressed water.
For information on technical properties and standards, write to us at info@azur.si
